Page 32 از مقایسه Speakers

15 comparisons are ready for you on this page

Comparison Anker Soundcore Rave vs Anker Soundcore Flare Mini

Feature

Anker Soundcore Rave

Anker Soundcore Flare Mini

LED Status Indicator true true
Software Features Dedicated Soundcore app for sound and lighting customization -
Air outlet channels Back panel -
Body Material Plastic Plastic
Lighting true true
Other Design Features - Strap attachable
Product Weight 9800 gram (g) 480 gram (g)
Size and Dimensions 310 * 322 * 552 millimeter (mm) 72 * 86 * 141 millimeter (mm)
Additional Features DSP technology for enhanced sound quality / BassUp technology for enhanced bass quality / Ability to charge mobile phones via USB port (12W) 360° Sound / DSP technology for sound quality enhancement / BassUp technology for enhancing bass quality / PartyCast technology for connecting two or more Anker speakers for stereo sound
Bluetooth Support true true
Controller Details Power button / Volume scroll wheel / Playback control buttons / Source selection button / Bluetooth on/off button / Bass Boost activation button / Lighting adjustment button / Echo adjustment scroll wheel Power button / Volume buttons / Shared button for playback control and call answer/end / Lighting adjustment button / Shared button for Bluetooth activation and PartyCast
NFC Support false false
Operational Range 20 meter (m) 20 meter (m)
Equivalent Name - Anker A3167
Connection Type Wireless and Wired Wireless
General Grouping Portable Portable
Output Power Details - 2 x 5W
Microphone Noise Cancelling Capability false false
Remote Control false false
Audio Input Jack Support true false
Audio Input Jack Type 3.5mm -
Coaxial Port false false
Headphone Output Port true false
Hi-Res Support false false
IPX Resistance - IPX7 (Water resistant up to 1 meter deep for up to 30 minutes)
Internal Microphone false true
Microphone Input Port true false
Optical Input false false
RCA Input Port false false
TF Card Support false false
USB Port true false
Voice Call Support false true
Battery Capacity 20000mAh 2600mAh
Battery Technology - Lithium-Ion
Charging Method Via mains power connection port Via Micro USB port
Time to Full Charge Approximately 4 hours Approximately 3.5 hours
Bass Driver Size 133 millimeter (mm) -
Driver Technical Specifications - Use of neodymium magnet / Has two passive radiators
Number of Bass Drivers 2 piece -
Number of Treble Drivers 2 piece -
Sound Sensitivity (dB) 105 decibel (db) -
Treble Driver Size (Tweeter) 50.8 millimeter (mm) -

Comparison Anker Soundcore Rave vs Sony Srs Xb13

Feature

Anker Soundcore Rave

Sony Srs Xb13

LED Status Indicator true false
Software Features Dedicated Soundcore app for sound and lighting customization -
Air outlet channels Back panel -
Body Material Plastic Plastic
Lighting true false
Other Design Features - Strap attachable
Product Weight 9800 gram (g) 253 gram (g)
Size and Dimensions 310 * 322 * 552 millimeter (mm) 76 * 76 * 95 millimeter (mm)
Additional Features DSP technology for enhanced sound quality / BassUp technology for enhanced bass quality / Ability to charge mobile phones via USB port (12W) -
Bluetooth Support true false
Controller Details Power button / Volume scroll wheel / Playback control buttons / Source selection button / Bluetooth on/off button / Bass Boost activation button / Lighting adjustment button / Echo adjustment scroll wheel Power button / Shared button for call answer/end and playback control / Volume buttons / Shared button for Bluetooth activation and connecting to second speaker for stereo sound
NFC Support false false
Operational Range 20 meter (m) 10 meter (m)
Connection Type Wireless and Wired Wireless
General Grouping Portable Portable
Microphone Noise Cancelling Capability false false
Remote Control false false
Audio Input Jack Support true false
Audio Input Jack Type 3.5mm -
Coaxial Port false false
Headphone Output Port true false
Hi-Res Support false false
IPX Resistance - IP67 (Dust and water resistant up to 1 meter deep for up to 30 minutes)
Internal Microphone false false
Microphone Input Port true false
Optical Input false false
RCA Input Port false false
TF Card Support false false
USB Port true false
Voice Call Support false false
Battery Capacity 20000mAh -
Battery Technology - Lithium-Ion
Charging Method Via mains power connection port Via USB Type-C port
Power Consumption - 2.5W (5V / 0.5A)
Time to Full Charge Approximately 4 hours Approximately 4.5 hours
Bass Driver Size 133 millimeter (mm) -
Driver Technical Specifications - 46mm driver / Equipped with passive radiator
Frequency Response Range - 20-20000 hertz (hz)
Number of Bass Drivers 2 piece -
Number of Treble Drivers 2 piece -
Sound Sensitivity (dB) 105 decibel (db) -
Treble Driver Size (Tweeter) 50.8 millimeter (mm) -

Comparison Proda Bom Box 200 vs Anker Soundcore Flare 2

Feature

Proda Bom Box 200

Anker Soundcore Flare 2

LED Status Indicator true true
Software Features - Dedicated Soundcore app for lighting customization
Body Material Plastic Plastic
Lighting true true
Lighting Details RGB lighting -
Other Design Features Has LED display / Has handle for easy carrying / Shoulder strap attachable for easy carrying -
Product Weight 1500 gram (g) 585 gram (g)
Size and Dimensions 150 * 200 * 380 millimeter (mm) 89 * 89 * 160 millimeter (mm)
Additional Features FM Radio playback capability / TWS support / Voice recording capability / Karaoke mode support / Guitar input 360° Sound / DSP technology for sound quality enhancement / BassUp technology for enhancing bass quality / PartyCast technology for connecting two or more Anker speakers for stereo sound
Bluetooth Support true true
Controller Details Shared scroll wheel for power and speaker volume / TREBLE scroll wheel / BASS scroll wheel / Shared button for source selection and lighting adjustment / Playback control buttons Power button / Volume buttons / Shared button for playback control and call answer/end / Bass Boost activation button / Lighting adjustment button / Shared button for Bluetooth activation and PartyCast
NFC Support false false
Operational Range - 20 meter (m)
Equivalent Name - Anker A3165
Connection Type Wireless and Wired Wireless
General Grouping Portable Portable
Output Power Details - 2 x 10W
Microphone Noise Cancelling Capability false false
Remote Control false false
Audio Input Jack Support true false
Audio Input Jack Type 3.5mm -
Coaxial Port false false
Headphone Output Port false false
Hi-Res Support false false
IPX Resistance No IPX7 (Water resistant up to 1 meter deep for up to 30 minutes)
Internal Microphone false true
Microphone Input Port true false
Microphone input port type 6.35mm -
Optical Input false false
RCA Input Port false false
TF Card Support true false
USB Port true false
Voice Call Support false true
Battery Capacity 1800mAh 5200mAh
Battery Technology - Lithium-Ion
Charging Method Via Micro USB port Via USB Type-C port
Power Consumption 5 volt (v) 10W (5V / 2A)
Time to Full Charge Approximately 8 hours Approximately 3.5 hours
Signal-to-Noise Ratio (S/N Ratio) 85 decibel (db) -
Bass Driver Size 101.6 millimeter (mm) -
Driver Technical Specifications - Equipped with two drivers / Has passive radiator
Number of Bass Drivers 2 piece -

Comparison Anker Soundcore Rave vs Jbl Charge 5

Feature

Anker Soundcore Rave

Jbl Charge 5

LED Status Indicator true true
Software Features Dedicated Soundcore app for sound and lighting customization Dedicated JBL PORTABLE app for sound customization
Air outlet channels Back panel -
Body Material Plastic Plastic
Lighting true false
Product Weight 9800 gram (g) 960 gram (g)
Size and Dimensions 310 * 322 * 552 millimeter (mm) 94 * 96.5 * 223 millimeter (mm)
Additional Features DSP technology for enhanced sound quality / BassUp technology for enhanced bass quality / Ability to charge mobile phones via USB port (12W) PartyBoost technology for connecting two or more JBL speakers for stereo sound / JBL Radiator technology and use of two passive radiators for enhanced Bass quality / Ability to charge mobile phones via USB port
Bluetooth Support true true
Controller Details Power button / Volume scroll wheel / Playback control buttons / Source selection button / Bluetooth on/off button / Bass Boost activation button / Lighting adjustment button / Echo adjustment scroll wheel Power button / Bluetooth on/off button / Playback control button / Volume buttons / PartyBoost button
NFC Support false false
Operational Range 20 meter (m) -
Wireless Connection Details - Signal transmission power less than 20 dBm (Bluetooth connection) / Signal transmission frequency 2.400 to 2.4835 GHz (Bluetooth connection) / Signal transmission modulation GFSK, π/4 DQPSK, 8DPSK
Connection Type Wireless and Wired Wireless
General Grouping Portable Portable
Microphone Noise Cancelling Capability false false
Remote Control false false
Audio Input Jack Support true false
Audio Input Jack Type 3.5mm -
Coaxial Port false false
Headphone Output Port true false
Hi-Res Support false false
IPX Resistance - IP67 (Dust and water resistant up to 1 meter deep for up to 30 minutes)
Internal Microphone false false
Microphone Input Port true false
Optical Input false false
RCA Input Port false false
TF Card Support false false
USB Port true true
Voice Call Support false false
Battery Capacity 20000mAh 7500mAh
Battery Technology - Lithium Polymer
Charging Method Via mains power connection port Via USB Type-C port
Power Consumption - 5V / 3A
Time to Full Charge Approximately 4 hours Approximately 4 hours
Bass Driver Size 133 millimeter (mm) 52 millimeter (mm)
Driver Technical Specifications - 90 x 52 mm woofer
Frequency Response Range - 60-20000 hertz (hz)
Number of Bass Drivers 2 piece 1 piece
Number of Treble Drivers 2 piece 1 piece
Sound Sensitivity (dB) 105 decibel (db) -
Treble Driver Size (Tweeter) 50.8 millimeter (mm) 20 millimeter (mm)

Comparison Anker Soundcore Rave vs Anker Soundcore Flare 2

Feature

Anker Soundcore Rave

Anker Soundcore Flare 2

LED Status Indicator true true
Software Features Dedicated Soundcore app for sound and lighting customization Dedicated Soundcore app for lighting customization
Air outlet channels Back panel -
Body Material Plastic Plastic
Lighting true true
Product Weight 9800 gram (g) 585 gram (g)
Size and Dimensions 310 * 322 * 552 millimeter (mm) 89 * 89 * 160 millimeter (mm)
Additional Features DSP technology for enhanced sound quality / BassUp technology for enhanced bass quality / Ability to charge mobile phones via USB port (12W) 360° Sound / DSP technology for sound quality enhancement / BassUp technology for enhancing bass quality / PartyCast technology for connecting two or more Anker speakers for stereo sound
Bluetooth Support true true
Controller Details Power button / Volume scroll wheel / Playback control buttons / Source selection button / Bluetooth on/off button / Bass Boost activation button / Lighting adjustment button / Echo adjustment scroll wheel Power button / Volume buttons / Shared button for playback control and call answer/end / Bass Boost activation button / Lighting adjustment button / Shared button for Bluetooth activation and PartyCast
NFC Support false false
Operational Range 20 meter (m) 20 meter (m)
Equivalent Name - Anker A3165
Connection Type Wireless and Wired Wireless
General Grouping Portable Portable
Output Power Details - 2 x 10W
Microphone Noise Cancelling Capability false false
Remote Control false false
Audio Input Jack Support true false
Audio Input Jack Type 3.5mm -
Coaxial Port false false
Headphone Output Port true false
Hi-Res Support false false
IPX Resistance - IPX7 (Water resistant up to 1 meter deep for up to 30 minutes)
Internal Microphone false true
Microphone Input Port true false
Optical Input false false
RCA Input Port false false
TF Card Support false false
USB Port true false
Voice Call Support false true
Battery Capacity 20000mAh 5200mAh
Battery Technology - Lithium-Ion
Charging Method Via mains power connection port Via USB Type-C port
Power Consumption - 10W (5V / 2A)
Time to Full Charge Approximately 4 hours Approximately 3.5 hours
Bass Driver Size 133 millimeter (mm) -
Driver Technical Specifications - Equipped with two drivers / Has passive radiator
Number of Bass Drivers 2 piece -
Number of Treble Drivers 2 piece -
Sound Sensitivity (dB) 105 decibel (db) -
Treble Driver Size (Tweeter) 50.8 millimeter (mm) -

Comparison Datis Ds 1202 vs Anker Soundcore Flare Mini

Feature

Datis Ds 1202

Anker Soundcore Flare Mini

LED Status Indicator false true
Body Material Plastic Plastic
Lighting true true
Lighting Details RGB lighting -
Other Design Features Has internal handles for easy carrying / Has LED display / Has mobile phone stand Strap attachable
Product Weight 25000 gram (g) 480 gram (g)
Size and Dimensions 320 * 390 * 1330 millimeter (mm) 72 * 86 * 141 millimeter (mm)
Additional Features - 360° Sound / DSP technology for sound quality enhancement / BassUp technology for enhancing bass quality / PartyCast technology for connecting two or more Anker speakers for stereo sound
Bluetooth Support true true
Controller Details Power button / Playback control buttons / Source selection button / Lighting adjustment button / Microphone priority button / Echo adjustment scroll wheel / BASS adjustment scroll wheel / Treble adjustment scroll wheel / Microphone volume adjustment scroll wheel / Speaker volume scroll wheel Power button / Volume buttons / Shared button for playback control and call answer/end / Lighting adjustment button / Shared button for Bluetooth activation and PartyCast
NFC Support false false
Operational Range 10 meter (m) 20 meter (m)
Equivalent Name - Anker A3167
Connection Type Wireless and Wired Wireless
General Grouping Portable Portable
Output Power Details - 2 x 5W
Microphone Noise Cancelling Capability false false
Remote Control - false
Audio Input Jack Support true false
Audio Input Jack Type 3.5mm -
Coaxial Port false false
Headphone Output Port false false
Hi-Res Support false false
IPX Resistance No IPX7 (Water resistant up to 1 meter deep for up to 30 minutes)
Internal Microphone false true
Microphone Input Port true false
Microphone input port type 6.35mm -
Optical Input false false
RCA Input Port false false
TF Card Support true false
USB Port true false
Voice Call Support false true
Battery Capacity - 2600mAh
Battery Technology - Lithium-Ion
Charging Method Via mains power connection port Via Micro USB port
Time to Full Charge - Approximately 3.5 hours
Bass Driver Size 304.8 millimeter (mm) -
Driver Technical Specifications - Use of neodymium magnet / Has two passive radiators
Number of Bass Drivers 2 piece -

Comparison Xp Product Xp S72G vs Hiska B193

Feature

Xp Product Xp S72G

Hiska B193

LED Status Indicator true true
Body Material Plastic Plastic
Lighting true true
Lighting Details RGB lighting RGB lighting
Other Design Features Has silicone pads under speaker to reduce vibration Shoulder strap attachable
Product Weight 300 gram (g) 974 gram (g)
Size and Dimensions - 116 * 123 * 283 millimeter (mm)
Additional Features FM radio playback in the 87 to 108 MHz frequency range Radio playback capability / TWS support / CE, RoHS certifications
Bluetooth Support true true
Controller Details Power button / Source selection button / Lighting adjustment button / Playback control buttons Power button / Light effect adjustment button / Source selection button / Shared buttons for playback control, call, and radio
NFC Support false false
Operational Range 10 meter (m) 10 meter (m)
Connection Type Wireless and Wired Wireless and Wired
General Grouping Portable Portable
Microphone Noise Cancelling Capability false false
Remote Control false false
Audio Input Jack Support true true
Audio Input Jack Type 3.5mm 3.5mm
Coaxial Port false false
Headphone Output Port false false
Hi-Res Support false false
IPX Resistance No No
Internal Microphone false true
Microphone Input Port false false
Optical Input false false
RCA Input Port false false
TF Card Support true true
USB Port true true
Voice Call Support false true
Battery Capacity 500mAh 3600mAh
Charging Method Via USB Type-C port Via Micro USB port
Power Consumption 5 volt (v) -
Time to Full Charge - Approximately 5 hours
Signal-to-Noise Ratio (S/N Ratio) 75 decibel (db) 90 decibel (db)
Driver Technical Specifications 45mm driver 2 x 76.2mm drivers
Frequency Response Range 100-20000 hertz (hz) 120-20000 hertz (hz)
Impedance 4 ohm (Ω) 4 ohm (Ω)

Comparison Xp Product Xp S72G vs Anker Soundcore Flare Plus

Feature

Xp Product Xp S72G

Anker Soundcore Flare Plus

LED Status Indicator true true
Software Features - Dedicated Soundcore app for sound and lighting customization
Body Material Plastic Plastic
Lighting true true
Lighting Details RGB lighting -
Other Design Features Has silicone pads under speaker to reduce vibration -
Product Weight 300 gram (g) 853 gram (g)
Size and Dimensions - 100 * 100 * 182 millimeter (mm)
Additional Features FM radio playback in the 87 to 108 MHz frequency range 360-degree sound / BassUp technology for enhanced bass quality / PartyCast technology for connecting two or more Anker speakers for stereo sound / Ability to charge mobile phones via USB port (5W)
Bluetooth Support true true
Controller Details Power button / Source selection button / Lighting adjustment button / Playback control buttons Power button / Volume buttons / Shared button for playback control and call answer/end / Bass Boost activation button / Lighting adjustment button / Shared button for Bluetooth activation and PartyCast
NFC Support false false
Operational Range 10 meter (m) 20 meter (m)
Equivalent Name - Anker A3162
Connection Type Wireless and Wired Wireless and Wired
General Grouping Portable Portable
Microphone Noise Cancelling Capability false false
Remote Control false false
Audio Input Jack Support true true
Audio Input Jack Type 3.5mm 3.5mm
Coaxial Port false false
Headphone Output Port false false
Hi-Res Support false false
IPX Resistance No IPX7 (Water resistant up to 1 meter deep for up to 30 minutes)
Internal Microphone false true
Microphone Input Port false false
Optical Input false false
RCA Input Port false false
TF Card Support true false
USB Port true true
Voice Call Support false true
Battery Capacity 500mAh -
Charging Method Via USB Type-C port Via Micro USB port
Power Consumption 5 volt (v) 10W (5V / 2A)
Time to Full Charge - Approximately 4 hours
Signal-to-Noise Ratio (S/N Ratio) 75 decibel (db) -
Driver Technical Specifications 45mm driver Equipped with four drivers / Has two passive radiators
Frequency Response Range 100-20000 hertz (hz) -
Impedance 4 ohm (Ω) -

Comparison Xp Product Xp S72G vs Jbl Flip 5

Feature

Xp Product Xp S72G

Jbl Flip 5

LED Status Indicator true true
Software Features - Dedicated JBL Connect app for sound customization
Body Material Plastic Plastic and Fabric
Lighting true false
Lighting Details RGB lighting -
Other Design Features Has silicone pads under speaker to reduce vibration Strap attachable
Product Weight 300 gram (g) 540 gram (g)
Size and Dimensions - 69 * 74 * 181 millimeter (mm)
Additional Features FM radio playback in the 87 to 108 MHz frequency range PartyBoost technology for connecting two or more JBL speakers for stereo sound
Bluetooth Support true true
Controller Details Power button / Source selection button / Lighting adjustment button / Playback control buttons Power button / Bluetooth on/off button / Playback control button / Volume buttons / PartyBoost button
NFC Support false false
Operational Range 10 meter (m) -
Connection Type Wireless and Wired Wireless
General Grouping Portable Portable
Microphone Noise Cancelling Capability false false
Remote Control false false
Audio Input Jack Support true false
Audio Input Jack Type 3.5mm -
Coaxial Port false false
Headphone Output Port false false
Hi-Res Support false false
IPX Resistance No IPX7 (Water resistant up to 1 meter deep for up to 30 minutes)
Internal Microphone false false
Microphone Input Port false false
Optical Input false false
RCA Input Port false false
TF Card Support true false
USB Port true false
Voice Call Support false false
Battery Capacity 500mAh 4800 mAh
Battery Technology - Lithium Polymer
Charging Method Via USB Type-C port Via USB Type-C port
Power Consumption 5 volt (v) 5V / 3A
Time to Full Charge - Approximately 2.5 hours
Signal-to-Noise Ratio (S/N Ratio) 75 decibel (db) -
Driver Technical Specifications 45mm driver 80 x 44 mm transducer
Frequency Response Range 100-20000 hertz (hz) 65-20000 hertz (hz)
Impedance 4 ohm (Ω) -

Comparison Datis Ds 1202 vs Anker Soundcore Flare Plus

Feature

Datis Ds 1202

Anker Soundcore Flare Plus

LED Status Indicator false true
Software Features - Dedicated Soundcore app for sound and lighting customization
Body Material Plastic Plastic
Lighting true true
Lighting Details RGB lighting -
Other Design Features Has internal handles for easy carrying / Has LED display / Has mobile phone stand -
Product Weight 25000 gram (g) 853 gram (g)
Size and Dimensions 320 * 390 * 1330 millimeter (mm) 100 * 100 * 182 millimeter (mm)
Additional Features - 360-degree sound / BassUp technology for enhanced bass quality / PartyCast technology for connecting two or more Anker speakers for stereo sound / Ability to charge mobile phones via USB port (5W)
Bluetooth Support true true
Controller Details Power button / Playback control buttons / Source selection button / Lighting adjustment button / Microphone priority button / Echo adjustment scroll wheel / BASS adjustment scroll wheel / Treble adjustment scroll wheel / Microphone volume adjustment scroll wheel / Speaker volume scroll wheel Power button / Volume buttons / Shared button for playback control and call answer/end / Bass Boost activation button / Lighting adjustment button / Shared button for Bluetooth activation and PartyCast
NFC Support false false
Operational Range 10 meter (m) 20 meter (m)
Equivalent Name - Anker A3162
Connection Type Wireless and Wired Wireless and Wired
General Grouping Portable Portable
Microphone Noise Cancelling Capability false false
Remote Control - false
Audio Input Jack Support true true
Audio Input Jack Type 3.5mm 3.5mm
Coaxial Port false false
Headphone Output Port false false
Hi-Res Support false false
IPX Resistance No IPX7 (Water resistant up to 1 meter deep for up to 30 minutes)
Internal Microphone false true
Microphone Input Port true false
Microphone input port type 6.35mm -
Optical Input false false
RCA Input Port false false
TF Card Support true false
USB Port true true
Voice Call Support false true
Charging Method Via mains power connection port Via Micro USB port
Power Consumption - 10W (5V / 2A)
Time to Full Charge - Approximately 4 hours
Bass Driver Size 304.8 millimeter (mm) -
Driver Technical Specifications - Equipped with four drivers / Has two passive radiators
Number of Bass Drivers 2 piece -

Comparison Xp Product Xp S72G vs Sony Srs Xb23

Feature

Xp Product Xp S72G

Sony Srs Xb23

LED Status Indicator true false
Software Features - Music Center app for sound customization
Body Material Plastic Plastic
Lighting true false
Lighting Details RGB lighting -
Other Design Features Has silicone pads under speaker to reduce vibration Strap attachable / Can be placed and used horizontally
Product Weight 300 gram (g) 580 gram (g)
Size and Dimensions - 76 * 76 * 218 millimeter (mm)
Additional Features FM radio playback in the 87 to 108 MHz frequency range -
Bluetooth Support true false
Controller Details Power button / Source selection button / Lighting adjustment button / Playback control buttons Power button / Shared button for call answer/end and playback control / Volume buttons / Shared button for Bluetooth activation and connecting to second speaker for stereo sound / Party button for connecting to multiple other speakers / STAMINA button for battery saving
NFC Support false false
Operational Range 10 meter (m) 30 meter (m)
Connection Type Wireless and Wired Wireless
General Grouping Portable Portable
Output Power Details - Two 4W
Microphone Noise Cancelling Capability false false
Remote Control false false
Audio Input Jack Support true false
Audio Input Jack Type 3.5mm -
Coaxial Port false false
Headphone Output Port false false
Hi-Res Support false false
IPX Resistance No IP67 (Dust and water resistant up to 1 meter deep for up to 30 minutes)
Internal Microphone false false
Microphone Input Port false false
Optical Input false false
RCA Input Port false false
TF Card Support true false
USB Port true false
Voice Call Support false false
Battery Capacity 500mAh -
Battery Technology - Lithium-Ion
Charging Method Via USB Type-C port Via USB Type-C port
Power Consumption 5 volt (v) In use: 7.5W (5V / 1.5A) / Standby mode: 0.3W / STAMINA technology for reduced battery consumption
Time to Full Charge - Approximately 4 hours
Signal-to-Noise Ratio (S/N Ratio) 75 decibel (db) -
Driver Technical Specifications 45mm driver Two 42 x 51mm drivers / Equipped with passive radiator
Frequency Response Range 100-20000 hertz (hz) 20-20000 hertz (hz)
Impedance 4 ohm (Ω) -

Comparison Xp Product Xp S72G vs Anker Soundcore Flare 2

Feature

Xp Product Xp S72G

Anker Soundcore Flare 2

LED Status Indicator true true
Software Features - Dedicated Soundcore app for lighting customization
Body Material Plastic Plastic
Lighting true true
Lighting Details RGB lighting -
Other Design Features Has silicone pads under speaker to reduce vibration -
Product Weight 300 gram (g) 585 gram (g)
Size and Dimensions - 89 * 89 * 160 millimeter (mm)
Additional Features FM radio playback in the 87 to 108 MHz frequency range 360° Sound / DSP technology for sound quality enhancement / BassUp technology for enhancing bass quality / PartyCast technology for connecting two or more Anker speakers for stereo sound
Bluetooth Support true true
Controller Details Power button / Source selection button / Lighting adjustment button / Playback control buttons Power button / Volume buttons / Shared button for playback control and call answer/end / Bass Boost activation button / Lighting adjustment button / Shared button for Bluetooth activation and PartyCast
NFC Support false false
Operational Range 10 meter (m) 20 meter (m)
Equivalent Name - Anker A3165
Connection Type Wireless and Wired Wireless
General Grouping Portable Portable
Output Power Details - 2 x 10W
Microphone Noise Cancelling Capability false false
Remote Control false false
Audio Input Jack Support true false
Audio Input Jack Type 3.5mm -
Coaxial Port false false
Headphone Output Port false false
Hi-Res Support false false
IPX Resistance No IPX7 (Water resistant up to 1 meter deep for up to 30 minutes)
Internal Microphone false true
Microphone Input Port false false
Optical Input false false
RCA Input Port false false
TF Card Support true false
USB Port true false
Voice Call Support false true
Battery Capacity 500mAh 5200mAh
Battery Technology - Lithium-Ion
Charging Method Via USB Type-C port Via USB Type-C port
Power Consumption 5 volt (v) 10W (5V / 2A)
Time to Full Charge - Approximately 3.5 hours
Signal-to-Noise Ratio (S/N Ratio) 75 decibel (db) -
Driver Technical Specifications 45mm driver Equipped with two drivers / Has passive radiator
Frequency Response Range 100-20000 hertz (hz) -
Impedance 4 ohm (Ω) -

Comparison Geepas Gms11153 vs Tsco Ts 2319

Feature

Geepas Gms11153

Tsco Ts 2319

LED Status Indicator true false
Body Material Plastic Plastic
Lighting true false
Lighting Details LED lighting -
Other Design Features Has LED display / Has mobile and tablet stand / Has wheels and internal handle for easy carrying Shoulder strap attachable
Product Weight 16.5 kilogram (kg) 650 gram (g)
Size and Dimensions 360 * 370 * 1100 millimeter (mm) 81 * 89 * 220 millimeter (mm)
Additional Features 5 Audio effects / 6 Lighting effects / FM Radio playback capability / TWS support / Guitar input capability Radio playback capability
Bluetooth Support true true
NFC Support false false
Operational Range - 10 meter (m)
Connection Type Wireless and Wired Wireless and Wired
General Grouping Portable Portable
Microphone Noise Cancelling Capability false false
Remote Control - false
Audio Input Jack Support true true
Audio Input Jack Type 3.5mm 3.5mm
Coaxial Port false false
Headphone Output Port false false
Hi-Res Support false false
IPX Resistance No No
Internal Microphone false false
Microphone Input Port true true
Microphone input port type 6.35mm 6.35mm
Optical Input false false
RCA Input Port true false
TF Card Support true true
USB Port true true
Voice Call Support false false
Battery Capacity - 1200mAh
Battery Technology - Lithium-Ion
Charging Method Via mains power connection port Via Micro USB port
Standby Battery Life - 20 hour (h)
Bass Driver Size 304.8 millimeter (mm) -
Frequency Response Range - 100-18000 hertz (hz)
Number of Bass Drivers 2 piece -
Sound Sensitivity (dB) - 85 decibel (db)

Comparison Xp Product Xp S72G vs Sony Srs Xb13

Feature

Xp Product Xp S72G

Sony Srs Xb13

LED Status Indicator true false
Body Material Plastic Plastic
Lighting true false
Lighting Details RGB lighting -
Other Design Features Has silicone pads under speaker to reduce vibration Strap attachable
Product Weight 300 gram (g) 253 gram (g)
Size and Dimensions - 76 * 76 * 95 millimeter (mm)
Additional Features FM radio playback in the 87 to 108 MHz frequency range -
Bluetooth Support true false
Controller Details Power button / Source selection button / Lighting adjustment button / Playback control buttons Power button / Shared button for call answer/end and playback control / Volume buttons / Shared button for Bluetooth activation and connecting to second speaker for stereo sound
NFC Support false false
Operational Range 10 meter (m) 10 meter (m)
Connection Type Wireless and Wired Wireless
General Grouping Portable Portable
Microphone Noise Cancelling Capability false false
Remote Control false false
Audio Input Jack Support true false
Audio Input Jack Type 3.5mm -
Coaxial Port false false
Headphone Output Port false false
Hi-Res Support false false
IPX Resistance No IP67 (Dust and water resistant up to 1 meter deep for up to 30 minutes)
Internal Microphone false false
Microphone Input Port false false
Optical Input false false
RCA Input Port false false
TF Card Support true false
USB Port true false
Voice Call Support false false
Battery Capacity 500mAh -
Battery Technology - Lithium-Ion
Charging Method Via USB Type-C port Via USB Type-C port
Power Consumption 5 volt (v) 2.5W (5V / 0.5A)
Time to Full Charge - Approximately 4.5 hours
Signal-to-Noise Ratio (S/N Ratio) 75 decibel (db) -
Driver Technical Specifications 45mm driver 46mm driver / Equipped with passive radiator
Frequency Response Range 100-20000 hertz (hz) 20-20000 hertz (hz)
Impedance 4 ohm (Ω) -

Comparison Xp Product Xp S72G vs Tsco Ts 2319

Feature

Xp Product Xp S72G

Tsco Ts 2319

LED Status Indicator true false
Body Material Plastic Plastic
Lighting true false
Lighting Details RGB lighting -
Other Design Features Has silicone pads under speaker to reduce vibration Shoulder strap attachable
Product Weight 300 gram (g) 650 gram (g)
Size and Dimensions - 81 * 89 * 220 millimeter (mm)
Additional Features FM radio playback in the 87 to 108 MHz frequency range Radio playback capability
Bluetooth Support true true
Controller Details Power button / Source selection button / Lighting adjustment button / Playback control buttons -
NFC Support false false
Operational Range 10 meter (m) 10 meter (m)
Connection Type Wireless and Wired Wireless and Wired
General Grouping Portable Portable
Microphone Noise Cancelling Capability false false
Remote Control false false
Audio Input Jack Support true true
Audio Input Jack Type 3.5mm 3.5mm
Coaxial Port false false
Headphone Output Port false false
Hi-Res Support false false
IPX Resistance No No
Internal Microphone false false
Microphone Input Port false true
Microphone input port type - 6.35mm
Optical Input false false
RCA Input Port false false
TF Card Support true true
USB Port true true
Voice Call Support false false
Battery Capacity 500mAh 1200mAh
Battery Technology - Lithium-Ion
Charging Method Via USB Type-C port Via Micro USB port
Power Consumption 5 volt (v) -
Standby Battery Life - 20 hour (h)
Signal-to-Noise Ratio (S/N Ratio) 75 decibel (db) -
Driver Technical Specifications 45mm driver -
Frequency Response Range 100-20000 hertz (hz) 100-18000 hertz (hz)
Impedance 4 ohm (Ω) -
Sound Sensitivity (dB) - 85 decibel (db)